skip to Main Content

$14.00$265.00

Change Selection

Shipping : FREE on all orders above $20 in the continental US

Are you a Contractor?  Sign up for Discounts!
Location : Interior
Task : Floor/Wall Coating
Application : Squeegee Roller Brush
Surface : Concrete Wood Metal
Base : 100% Solids Epoxy
Drytime : 8hrs at 75 deg F
Coverage : 80-200 sq.ft/gal
Finish : Crystal Clear

澳洲幸运5官网平台

Chem Natural 100% Solids Self leveling Epoxy Clear Coat with UV Inhibitors-3Gal Kit

Chem Natural is a two-component high wear-resistant, self-leveling, epoxy coating with UV resistance. The product cures to form water clear gloss coating that is extremely durable, heat resistant and is suitable for use in a wide range of applications on concrete and wood floors and countertops.

Features

  • UV Resistant
  • Non-blushing
  • Heat resistant for countertops
  • High impact and wear resistance
  • Solvent-free and low odor
  •  Self Leveling
  • Resistant to a wide range of chemicals
  • Stain-resistant
  • Easy to clean and maintain
  • Can be used in a flake or quartz broadcast system
  • USDA compliant for incidental contact in food
    preparation areas

Main Uses

  • Showrooms
  • Countertops
  • Garage Floors
  • River Tables
  • Supermarket floors
  • Airplane Hangers
  • Food preparation areas
  • Kitchens
  • Pharmaceutical plants
  • Warehouses
  • Stairwells

澳洲幸运5开奖直播软件

130ft2 per gallon at 12mils thickness.

Dry Time

Tack free in approx  8 hours at  77°F (25°C). Dry time will vary depending on temperature and humidity.

Packaging

3 gallon (11.4 L)

Shelf Life

12 months when stored unopened below 77°F (25°C) under shade in a dry environment.

Application

Apply at a rate of between 80-200ft²/gal using a squeegee and immediately backroll with a 3/8” nap roller.

If desired recoat after 8 to 24 hours at 77oF. Clean equipment using solvent.

Finish

Gloss Water Clear Epoxy

Slip Resistant Finish

A slip-resistant finish can be achieved by adding CoverGrip Fine or medium to the topcoat at the time of mixing.

CoverGrip should be added at a rate of 3.2 oz per gal.

Are you a contractor? Contact us for special pricing

Frequently Asked Questions

Chem Natural Photos

Chem Natural Videos

Back To Top